Differences

This shows you the differences between two versions of the page.

--- esp_lyrat_can_board [2023/03/02 22:36] – created oliver
+++ esp_lyrat_can_board [2023/03/04 07:03] (current) – removed robertnixdorf
@@ Line 1: / Line 1: @@
-====== ESP LyraT CAN board ======
-A [[https://docs.espressif.com/projects/esp-adf/en/latest/design-guide/dev-boards/board-esp32-lyrat-v4.3.html|LyraT v4.3]] wired up to an ESP-less [[https://github.com/airgiants/ESP32-NODE|unfurl node]]. We redefine the JTAG pins as a CAN ([[https://docs.espressif.com/projects/esp-idf/en/latest/esp32/api-reference/peripherals/twai.html|TWAI]]) interface and connect them directly to the pads on the node board that are connected to the [[https://www.ti.com/lit/ds/symlink/sn65hvd230.pdf|CAN bus transceiver]].
-The goal is to prototype an ESP-based "Audio Node" to replace the Beaglebone board for playing the creature sounds
-{{https://wiki.airgiants.co.uk//lib/plugins/ckgedit/fckeditor/userfiles/image/img_20230301_111810.jpg?nolink&460x345}}
-{{:esp_lyrat_can_dips.jpg?nolink&460x345}}
- <font 14px/inherit;;inherit;;inherit>MTDI (GPIO_12) -> CAN_D (GPIO_5)</font>
- <font 14px/inherit;;inherit;;inherit>MTDO (GPIO_14) -> CAN_R (GPIO_4)</font>
-.3V and GND come from the Lyra board
-DIP switches 3, 4, 5, 6, 7 are in the ON position, and the SD card has to be in 1-wire mode.
-A basic CAN example from ESP-IDF is being used to test it with an [[https://jbrengineering.co.uk/web-dfu/|Entree CAN interface]] running the candlelight firmware.